HORIZONTAL CENTRIFUGAL PUMPS
ENOLA
HORIZONTAL AXIS CENTRIFUGAL PUMP
Designed for loading filter presses, they are supplied with one or two speed motors (the first for the loading phase and the second for the pressing phase) according to the customer’s requirements. They can reach a final pressure of over 7 Bar. In addition to the fully rubberized pumping unit, the discharge port can be swivelled so that the sludge is directed directly onto the impeller without coming into contact with the seals;
The seal assembly consists of a double mechanical seal made of tungsten carbide drained with water and protected by a barrier chamber pressurised with grease and pressure.
TECHNICAL SPECIFICATION
AXLE
Horizontal pump axis with sealed chamber bearings sized to allow the front of the shaft to work overhanging without supports immersed in the liquid.
COUPLING
Using V-belts and trapezoidal pulleys or coupling (with protective casing).
IMPELLER
Open-type anti-clogging, consisting of a steel core coated with a special anti abrasive compound.
SEALING GROUP
Consisting of a double mechanical seal in tungsten carbide drained with water protected by a pressurised barrier chamber and constant pressure.
BODY
Made of cast iron divided into two halves with a protective coating of our special moulded wear-resistant compound, consisting of replaceable shells. PSO 45, 50 and 55 models have bodies with a special wear-resistant compound vulcanised directly onto the cast iron. With axial suction port and radial discharge port facing upwards.
BASE
Steel for fixing the pump to the floor.
